WAS WebSocket Outbound (wsocOutbound)

Configuration properties for WAS WebSocket outgoing connection requests.

Name	Type	Default	Description
httpOptionsRef	A reference to top level httpOptions element (string).	defaultHttpOptions	HTTPprotocol options for WAS WebSocket outbound
sslOptionsRef	A reference to top level sslOptions element (string).		SSL protocol options for WAS WebSocket outbound
tcpOptionsRef	A reference to top level tcpOptions element (string).	defaultTCPOptions	TCP protocol options for WAS WebSocket outbound

Name

Type

Default

Description

httpOptionsRef

A reference to top level httpOptions element (string).

defaultHttpOptions

HTTPprotocol options for WAS WebSocket outbound

sslOptionsRef

A reference to top level sslOptions element (string).

SSL protocol options for WAS WebSocket outbound

tcpOptionsRef

A reference to top level tcpOptions element (string).

defaultTCPOptions

TCP protocol options for WAS WebSocket outbound

httpOptions

HTTPprotocol options for WAS WebSocket outbound

Name	Type	Default	Description
AutoDecompression	boolean	true	Specifies whether the HTTP Channel automatically decompresses incoming request body data.
DoNotAllowDuplicateSetCookies	string	false	Prevents the HTTP Channel from sending multiple Set-Cookie headers with the same name.
MessageSizeLimit	long	-1	Limits the acceptable size of an incoming message. If a message arrives with a size larger than this value, then an error is returned to the remote client.
NoCacheCookiesControl	boolean	true	Allows the user to control whether or not the presence of a Set-Cookie header should update the Cache-Control header with a matching no-cache value. This also adds the Expires header.
ThrowIOEForInboundConnections	boolean		Specifies whether the HTTP channel creates an I/O exception when an inbound connection is closed while still in use by the servlet. The default value is set according to the configured servlet feature. Prior to Servlet 4.0, the default value is false; starting with Servlet 4.0, the default value is true.
connectionWindowSize	int Min: 65535 Max: 2147483647	65535	Specifies the window size in octets for HTTP/2 connection-level flow control. This value can be configured to any size within the range of 65,535 to 2,147,483,647 octets, inclusive. If no value is specified, the default value is 65,535 octets.
decompressionRatioLimit	int Min: 1	200	Specifies the maximum ratio of decompressed to compressed request body payload. The HTTP channel reads the request body and verifies the ratio as the body decompresses. The channel stops decompression of the request body if the decompression ratio remains above the configured value and the decompressionTolerance is reached.
decompressionTolerance	int Min: 0	3	Specifies the maximum number of times the HTTP channel tolerates a decompression ratio above the configured ratio, depicted by the decompressionRatioLimit httpOption attribute. If this number reaches, and the next decompression cycle still contains a decompression ratio above the ratio limit, then the HTTP channel stops decompressing the request body.
http2ConnectionIdleTimeout	A period of time with second precision	0	Specifies the amount of time, in seconds, that an HTTP/2 connection will be allowed to remain idle between socket IO operations. If not specified, or set to a value of 0, there is no connection timeout set. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.
incomingBodyBufferSize	int Min: 1024 Max: 1048576	32768	Specifies the size of each buffer used when reading the body of an incoming HTTP message.
keepAliveEnabled	boolean	true	Enables persistent connections (HTTP keepalive). If true, connections are kept alive for reuse by multiple sequential requests and responses. If false, connections are closed after the response is sent.
limitFieldSize	int Min: 50 Max: 32768	32768	Enforces the size limits on various HTTP fields, such as request URLs, or individual header names or values. Enforcing the size limits of these fields guards against possible Denial of Service attacks. An error is returned to the remote client, if a field exceeds the allowed size.
limitNumHeaders	int Min: 50 Max: 500	500	Limits the number of HTTP headers that can exist in an incoming message. When this limit is exceeded, an error is returned to the remote client.
limitWindowUpdateFrames	boolean	false	Specifies whether the server waits until half of the HTTP/2 connection-level and stream-level windows are exhausted before it sends WINDOW_UPDATE frames. Valid values are true or false. If no value is specified, the default value is false.
maxConcurrentStreams	int	200	Specifies the maximum number of streams that an HTTP/2 connection can have active at any given point. Opening streams over the limit, will result on a REFUSED_STREAM (0x7). If not specified, the default value of concurrent streams will be set to 200.
maxFrameSize	int Min: 16384 Max: 16777215	57344	Specifies the maximum allowed size of a frame payload the server will advertise in the SETTINGS_MAX_FRAME_SIZE HTTP/2 settings frame. This can be configured to any size within the range of 16,384 to 16,777,215 bytes, inclusive. If not specified, the default is set to 57,344 bytes.
maxKeepAliveRequests	int Min: -1	-1	Maximum number of persistent requests that are allowed on a single HTTP connection if persistent connections are enabled. A value of -1 means unlimited. This option supports low latency or high throughput applications, and SSL connections for use in situations where building up a new connection can be costly.
persistTimeout	A period of time with second precision	30s	Amount of time that a socket will be allowed to remain idle between requests. This setting only applies if persistent connections are enabled. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.
readTimeout	A period of time with second precision	60s	Amount of time to wait for a read request to complete on a socket after the first read occurs. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.
removeServerHeader	boolean	false	Removes server implementation information from HTTP headers.
settingsInitialWindowSize	int Min: 1 Max: 2147483647	65535	Specifies the initial window size in octets for HTTP/2 stream-level flow control. This value can be configured to any size within the range of 1 to 2,147,483,647 octets, inclusive. If no value is specified, the default value is 65,535 octets.
writeTimeout	A period of time with second precision	60s	Amount of time to wait on a socket for each portion of the response data to be transmitted. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

Name

Type

Default

Description

AutoDecompression

boolean

true

Specifies whether the HTTP Channel automatically decompresses incoming request body data.

DoNotAllowDuplicateSetCookies

string

false

Prevents the HTTP Channel from sending multiple Set-Cookie headers with the same name.

MessageSizeLimit

long

-1

Limits the acceptable size of an incoming message. If a message arrives with a size larger than this value, then an error is returned to the remote client.

NoCacheCookiesControl

boolean

true

Allows the user to control whether or not the presence of a Set-Cookie header should update the Cache-Control header with a matching no-cache value. This also adds the Expires header.

ThrowIOEForInboundConnections

boolean

Specifies whether the HTTP channel creates an I/O exception when an inbound connection is closed while still in use by the servlet. The default value is set according to the configured servlet feature. Prior to Servlet 4.0, the default value is false; starting with Servlet 4.0, the default value is true.

connectionWindowSize

int
Min: 65535
Max: 2147483647

65535

Specifies the window size in octets for HTTP/2 connection-level flow control. This value can be configured to any size within the range of 65,535 to 2,147,483,647 octets, inclusive. If no value is specified, the default value is 65,535 octets.

decompressionRatioLimit

int
Min: 1

200

Specifies the maximum ratio of decompressed to compressed request body payload. The HTTP channel reads the request body and verifies the ratio as the body decompresses. The channel stops decompression of the request body if the decompression ratio remains above the configured value and the decompressionTolerance is reached.

decompressionTolerance

int
Min: 0

Specifies the maximum number of times the HTTP channel tolerates a decompression ratio above the configured ratio, depicted by the decompressionRatioLimit httpOption attribute. If this number reaches, and the next decompression cycle still contains a decompression ratio above the ratio limit, then the HTTP channel stops decompressing the request body.

http2ConnectionIdleTimeout

A period of time with second precision

Specifies the amount of time, in seconds, that an HTTP/2 connection will be allowed to remain idle between socket IO operations. If not specified, or set to a value of 0, there is no connection timeout set. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

incomingBodyBufferSize

int
Min: 1024
Max: 1048576

32768

Specifies the size of each buffer used when reading the body of an incoming HTTP message.

keepAliveEnabled

boolean

true

Enables persistent connections (HTTP keepalive). If true, connections are kept alive for reuse by multiple sequential requests and responses. If false, connections are closed after the response is sent.

limitFieldSize

int
Min: 50
Max: 32768

32768

Enforces the size limits on various HTTP fields, such as request URLs, or individual header names or values. Enforcing the size limits of these fields guards against possible Denial of Service attacks. An error is returned to the remote client, if a field exceeds the allowed size.

limitNumHeaders

int
Min: 50
Max: 500

500

Limits the number of HTTP headers that can exist in an incoming message. When this limit is exceeded, an error is returned to the remote client.

limitWindowUpdateFrames

boolean

false

Specifies whether the server waits until half of the HTTP/2 connection-level and stream-level windows are exhausted before it sends WINDOW_UPDATE frames. Valid values are true or false. If no value is specified, the default value is false.

maxConcurrentStreams

int

200

Specifies the maximum number of streams that an HTTP/2 connection can have active at any given point. Opening streams over the limit, will result on a REFUSED_STREAM (0x7). If not specified, the default value of concurrent streams will be set to 200.

maxFrameSize

int
Min: 16384
Max: 16777215

57344

Specifies the maximum allowed size of a frame payload the server will advertise in the SETTINGS_MAX_FRAME_SIZE HTTP/2 settings frame. This can be configured to any size within the range of 16,384 to 16,777,215 bytes, inclusive. If not specified, the default is set to 57,344 bytes.

maxKeepAliveRequests

int
Min: -1

-1

Maximum number of persistent requests that are allowed on a single HTTP connection if persistent connections are enabled. A value of -1 means unlimited. This option supports low latency or high throughput applications, and SSL connections for use in situations where building up a new connection can be costly.

persistTimeout

A period of time with second precision

30s

Amount of time that a socket will be allowed to remain idle between requests. This setting only applies if persistent connections are enabled. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

readTimeout

A period of time with second precision

60s

Amount of time to wait for a read request to complete on a socket after the first read occurs. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

removeServerHeader

boolean

false

Removes server implementation information from HTTP headers.

settingsInitialWindowSize

int
Min: 1
Max: 2147483647

65535

Specifies the initial window size in octets for HTTP/2 stream-level flow control. This value can be configured to any size within the range of 1 to 2,147,483,647 octets, inclusive. If no value is specified, the default value is 65,535 octets.

writeTimeout

A period of time with second precision

60s

Amount of time to wait on a socket for each portion of the response data to be transmitted. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

sslOptions

SSL protocol options for WAS WebSocket outbound

Name	Type	Default	Description
sessionTimeout	A period of time with second precision	1d	Amount of time to wait for a read or write request to complete on a socket. This value is overridden by protocol-specific timeouts. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.
sslRef	A reference to top level ssl element (string).		The default SSL configuration repertoire. The default value is defaultSSLConfig.
sslSessionTimeout	A period of time with millisecond precision	86400s	The timeout limit for an SSL session that is established by the SSL Channel. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), seconds (s), or milliseconds (ms). For example, specify 500 milliseconds as 500ms. You can include multiple values in a single entry. For example, 1s500ms is equivalent to 1.5 seconds.
suppressHandshakeErrors	boolean	false	Disable logging of SSL handshake errors. SSL handshake errors can occur during normal operation, however these messages can be useful when SSL is behaving unexpectedly. If disabled, the message and console logs do not record handshake errors, and the trace log records handshake errors when SSL Channel tracing is on.

Name

Type

Default

Description

sessionTimeout

A period of time with second precision

Amount of time to wait for a read or write request to complete on a socket. This value is overridden by protocol-specific timeouts. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), or seconds (s). For example, specify 30 seconds as 30s. You can include multiple values in a single entry. For example, 1m30s is equivalent to 90 seconds.

sslRef

A reference to top level ssl element (string).

The default SSL configuration repertoire. The default value is defaultSSLConfig.

sslSessionTimeout

A period of time with millisecond precision

86400s

The timeout limit for an SSL session that is established by the SSL Channel. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), seconds (s), or milliseconds (ms). For example, specify 500 milliseconds as 500ms. You can include multiple values in a single entry. For example, 1s500ms is equivalent to 1.5 seconds.

suppressHandshakeErrors

boolean

false

Disable logging of SSL handshake errors. SSL handshake errors can occur during normal operation, however these messages can be useful when SSL is behaving unexpectedly. If disabled, the message and console logs do not record handshake errors, and the trace log records handshake errors when SSL Channel tracing is on.

tcpOptions

TCP protocol options for WAS WebSocket outbound

Name	Type	Default	Description
acceptThread	boolean	false	If true, then listening ports do not share the same thread for accepting connections. Otherwise, they share the same thread.
addressExcludeList	string		A comma-separated list of addresses that are not allowed to make inbound connections on this endpoint. You can specify IPv4 or IPv6 addresses. All values in an IPv4 or IPv6 address must be represented by a number or by an asterisk wildcard character. As examples, valid IPv4 addresses for this list include ".1.255.0", "254...9", and "1...", and valid IPv6 addresses include "0:::0:007F:0:0001:0001", "F:FF:FFF:FFFF:1:01:001:0001", and "1234::4321::9F9f:::0000".
addressIncludeList	string		A comma-separated list of addresses that are allowed to make inbound connections on this endpoint. You can specify IPv4 or IPv6 addresses. All values in an IPv4 or IPv6 address must be represented by a number or by an asterisk wildcard character. As examples, valid IPv4 addresses for this list include ".1.255.0", "254...9", and "1...", and valid IPv6 addresses include "0:::0:007F:0:0001:0001", "F:FF:FFF:FFFF:1:01:001:0001", and "1234::4321::9F9f:::0000".
hostNameExcludeList	string		A comma-separated list of host names that are not allowed to make inbound connections on this endpoint. Host names are not case-sensitive and can start with an asterisk, which is used as a wildcard character. However, asterisks cannot be elsewhere in the host name. For example, .abc.com is valid, but .abc.* is not valid.
hostNameIncludeList	string		A comma-separated list of host names that are allowed to make inbound connections on this endpoint. Host names are not case-sensitive and can start with an asterisk, which is used as a wildcard character. However, asterisks cannot be elsewhere in the host name. For example, .abc.com is valid, but .abc.* is not valid.
inactivityTimeout	A period of time with millisecond precision	60s	Amount of time to wait for a read or write request to complete on a socket. This value is overridden by protocol-specific timeouts. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), seconds (s), or milliseconds (ms). For example, specify 500 milliseconds as 500ms. You can include multiple values in a single entry. For example, 1s500ms is equivalent to 1.5 seconds.
maxOpenConnections	int	128000	Defines the maximum number of connections allowed to be open on this endpoint.
portOpenRetries	int Min: 0 Max: 100000	0	Number of retries to open a TCP/IP port during server startup. There will be a one second delay between retries, until the opening is successful or the port open retry number is reached.
soReuseAddr	boolean	true	Enables immediate rebind to a port with no active listener.
waitToAccept	boolean	false	Queries whether this TCP Channel will delay accepting connections until the server starts. If false, connections are closed until the server starts. If true, the value for the acceptThread tcpOption is also set to true, and connections are delayed until the server starts.

Name

Type

Default

Description

acceptThread

boolean

false

If true, then listening ports do not share the same thread for accepting connections. Otherwise, they share the same thread.

addressExcludeList

string

A comma-separated list of addresses that are not allowed to make inbound connections on this endpoint. You can specify IPv4 or IPv6 addresses. All values in an IPv4 or IPv6 address must be represented by a number or by an asterisk wildcard character. As examples, valid IPv4 addresses for this list include "*.1.255.0", "254.*.*.9", and "1.*.*.*", and valid IPv6 addresses include "0:*:*:0:007F:0:0001:0001", "F:FF:FFF:FFFF:1:01:001:0001", and "1234:*:4321:*:9F9f:*:*:0000".

addressIncludeList

string

A comma-separated list of addresses that are allowed to make inbound connections on this endpoint. You can specify IPv4 or IPv6 addresses. All values in an IPv4 or IPv6 address must be represented by a number or by an asterisk wildcard character. As examples, valid IPv4 addresses for this list include "*.1.255.0", "254.*.*.9", and "1.*.*.*", and valid IPv6 addresses include "0:*:*:0:007F:0:0001:0001", "F:FF:FFF:FFFF:1:01:001:0001", and "1234:*:4321:*:9F9f:*:*:0000".

hostNameExcludeList

string

A comma-separated list of host names that are not allowed to make inbound connections on this endpoint. Host names are not case-sensitive and can start with an asterisk, which is used as a wildcard character. However, asterisks cannot be elsewhere in the host name. For example, *.abc.com is valid, but *.abc.* is not valid.

hostNameIncludeList

string

A comma-separated list of host names that are allowed to make inbound connections on this endpoint. Host names are not case-sensitive and can start with an asterisk, which is used as a wildcard character. However, asterisks cannot be elsewhere in the host name. For example, *.abc.com is valid, but *.abc.* is not valid.

inactivityTimeout

A period of time with millisecond precision

60s

Amount of time to wait for a read or write request to complete on a socket. This value is overridden by protocol-specific timeouts. Specify a positive integer followed by a unit of time, which can be hours (h), minutes (m), seconds (s), or milliseconds (ms). For example, specify 500 milliseconds as 500ms. You can include multiple values in a single entry. For example, 1s500ms is equivalent to 1.5 seconds.

maxOpenConnections

int

128000

Defines the maximum number of connections allowed to be open on this endpoint.

portOpenRetries

int
Min: 0
Max: 100000

Number of retries to open a TCP/IP port during server startup. There will be a one second delay between retries, until the opening is successful or the port open retry number is reached.

soReuseAddr

boolean

true

Enables immediate rebind to a port with no active listener.

waitToAccept

boolean

false

Queries whether this TCP Channel will delay accepting connections until the server starts. If false, connections are closed until the server starts. If true, the value for the acceptThread tcpOption is also set to true, and connections are delayed until the server starts.